Direct_Command_Parameter_3
Direct_Command_Parameter_3
| Address: | 16644 (4104H) |
| Type: | UINT16 |
| Access: | Read/Write |
| Unit: | -- |
| Range: | 0 to 10000 |
| Default Value: | 0 |
| Store Supported: | No |
| Description: |
This object permits to change the Profile_Velocity object to a value that is computed as follows:
If the Direct_Command_Parameter_3 is set to 0 or >10000 the Profile_Velocity object remain unchanged. |
| Notes: | See Direct_Command_CMD object for more details. |
